Spray Foam Calgary – Guidelines for the Effective Application of Spray Foam Calgary

Spray foam Calgary is a remarkable material used in insulation today. It is used on both residential and commercial buildings. It can also be used in transport trucks and other areas. However, if you plan on installing SPF on your own, there are a number of things you will have to do. Below are the key guidelines you should consider using every time you are working with polyurethane Calgary.

Understand the building envelope
The first and the most important thing you have to do are to understand the building envelope. Failing to cover the entire building envelope is what leads to most heating/cooling problems in a house. More often than not, people make the mistake of only covering the areas they see. They forget that failing to cover every spot will lead to unreliable results even when using the best Calgary spray foam. If you do not understand the building envelope, you should consider working with a professional. Spray foam is only as effective as how well it has been used.

Use protective equipment
Another thing you need to understand is that the chemicals contained in SPF are harmful. This is why spray foam contractors Calgary will not start any project before protecting themselves. You need to do the same. Cover your skin, eyes and nose before you start combing the chemicals. Prolonged exposure to these chemicals will lead to health problems. However, once spray foam is cured, it is completely harmless.

Keep the area ventilated
The work site needs to be ventilated properly. This is bearing to the fact that spray foam Calgary is harmful before it cures. The job site needs to be well ventilated in order to facilitate the curing process. In addition to that, you have to make sure that the site is well protected so that people don’t walk in unprotected. The chemicals should also not be allowed to leave the area as they will cause harm to the environment. Plan properly on how to keep the job site well protected.

Use the right type of SPF
You need to use the right type of Calgary spray foam. There are two types: open cell and closed cell. Open cell is ideal for use on internal walls. It is less dense and has a lower R-value. It is perfect for soundproofing. Closed cell on the other hand is denser and with a higher R-value. It can be used on exterior walls and it is remarkable in adding structural strength. Evaluate the pros and cons of each option before making a choice.

Maintain consistency
Last but not least, you have to maintain consistency when working with spray foam. The R-value has to be consistent all through. Areas with low R-value will lead to heat loss/gain. This can cause serious heating and cooling issues.

These are the key points you need to remember when working with spray foam. If you ever feel overwhelmed, do not hesitate to work with spray foam contractors Calgary.

Spray foam Calgary